Item On the topic of peeling, due to washi being fibrous, I don't have much of an issue of the plastic parts peeling off.

The terminal of the led will be floating a bit, so it might be tough to get the solder to stick to the led. 917646

Another tip would be to lower the nozzle closer to the build plate so the plastic is pressed against the paper when printing. 1 year ago 1 Review

Look closely and you will see two slightly darker parts to the led. There are no dimensions here, it is all relative.

504020 However, if you're just dabbling a little or experimenting with this craft, you might want a way to try it with just simple printer paper. This will be the negative side with the smaller one being positive.

1 year ago

While folding the printed parts become more prone to coming off. Brands

Look for a paper folder that folds in the range of 10,000 sheets per hour.

1 year ago

Glue the top of the collapsed cylinder to the cap. This is really neat! Most paper-folding machines accommodate letter-size paper with a weight ranging from 16-lb to 28-lb, but for more versatility, select models which can handle heavyweight papers. 5 Reviews

Reply 1 year ago Usually it takes 30 min to fold a large miura pattern, but it took less than a minute with this printing method. This project was a long time in the works.

i immediately thought of Tyvek when i saw this project as well Due to the irregular positioning of the fibers washi is very much like fabric.