It seems like you'd only be able to get 1-2 fibers attached to each LED with those, but if you choose wider lights, you might be able to get bundles of 10 or more fibers attached to each light. £66.59. Hello! 2 years ago For sandpaper, you can choose to sand at random intervals, or "strip" the ends 1-2 cm from the tip for a gradual glow. amazon.ae Best Sellers: The best items in Fiber Optic Cables based on Amazon customer purchases It's beautiful and my daughter just loves it.

Amazon Customer I think you would need much larger LEDs than the ones in the picture, though. Applications: It can be widely used in Night club, Disco, KTV, Bar, Banquet, Party, Floor show, Stage show, Evening show, Performance show, Vocal concert, Carnival, Wedding dinner, Lounge, Cafe, variety of fashion shows & Nightly entertainments and some other Special Events. Currently unavailable.

Usually ships within 6 to 10 days. You will also need to attach the fibers perpendicular to the light source, as shown in step 7, so NeoPixel strips are not the best candidate. I chose to have my LEDs in a giant waistband that got covered by the dress bodice. Certainly is worth the money. Hubtronics Arrived after numerous complications with courior See step 9 for ways to even out the light distribution. Begin weaving by poking a single strand of filament into the netting. Most fiber optic filament will come tightly curled around a spool. Thanks so much for your prompt reply! If there will still be a fair amount of light on stage, I would consider something like this instructable : Thanks you!! With all these parameters in mind, I chose individually addressable bulb-like LEDs connected by flexible wire. Amazon Customer "Arrived super fast and works perfectly for my sons starry bedroom" Adds to the arrangement of my solar light display If you have the time to weave the tubes more densely, that would be very helpful, too — mine were anywhere between a quarter inch and an inch apart, which is not as dense as I would’ve liked. Arrived super fast and works perfectly for my sons starry bedroom. "Good value for the money" Nicking the fiber optic casing allows some light to escape. "Four Stars" 2 years ago "... expectation the light is so bright that I could easily see my fiber location and" by Reply Adafruit Industries, Unique & fun DIY electronics and kits Face Mask With RGB LED Fiber Optic Fabric ID: 4605 - Protect yourself and look super rad with this RGB LED Fiber Optic Face Mask. You can control the light on / off and set the light colors through the buttons on the battery box or the remote. by

Cut two pieces of electrical tape long enough to cover the LED as well as the fibers up to the rubber band. Keep in mind that the amount of light you can output is bounded by the diameter of the fiber tube, though.

For scissors, open them wide and use a single blade to repeatedly tap the fiber. sassysally A few inches beyond the edge of the fabric, gently guide the fibers together and secure them together with a mini rubber band. by Let me know if you have any more questions!Oh my goodness, this is AWESOME! by :) It's sitting in the back by the zipper, right above the waist.